Why should I use VR for skills training?
Virtual reality offers many benefits to educational institutions and businesses. Interacting with humans or equipment in VR can help enhance learning.
OSHA's occupational ionizing radiation standard dates to 1971. ALARA+ reframes safety for modern fluoroscopy teams. What should training do differently?
In 1971, OSHA adopted its general-industry standard for occupational exposure to ionizing radiation.
The first successful percutaneous coronary angioplasty would not be performed until 1977.
Modern interventional cardiology had not yet emerged. Interventional radiology was still developing. The complex fluoroscopy-guided procedures now performed every day in cath labs, hybrid theatres and interventional suites were decades away.
Yet OSHA's general-industry ionizing radiation standard, 29 CFR 1910.1096, has not been substantially revised from its original 1971 version.
That does not mean radiation protection itself has stood still. It has not. The Nuclear Regulatory Commission, Department of Energy, professional bodies and international organisations have subsequently updated standards and guidance as evidence and technology have changed.
But the contrast is still striking.
ALARA+ means “As Low And as Light As Reasonably Achievable.”
Published in 2026, the ALARA+ framework expands the familiar concept of keeping radiation exposure As Low As Reasonably Achievable by explicitly considering another occupational hazard faced by people working in fluoroscopy: the musculoskeletal burden associated with traditional radiation protective equipment.
ALARA+ is not a new federal regulation and does not replace ALARA. It is a professional framework for thinking more broadly about occupational safety in fluoroscopy.
Since 1971, fluoroscopy-guided medicine has expanded enormously.
Interventional cardiology, electrophysiology, interventional radiology, neurointervention, vascular surgery and image-guided procedures now place large multidisciplinary teams around fluoroscopic equipment for increasingly sophisticated procedures.
A clinician may spend thousands of hours working in these environments over a career.
The issue is therefore larger than whether an individual exposure remains below a regulatory limit.
It is also about how occupational risk accumulates, how people work around radiation every day and whether the working environment is sustainable for the people delivering the care.
We explored that wider issue in Radiation Safety Is a Workforce Strategy .
“A regulation can define a minimum. It cannot teach someone how to work safely in a clinical environment that did not exist when that regulation was written.”
In March 2026, a multidisciplinary group published ALARA+: Summit on Radiation and Orthopedic Risks in Fluoroscopic Laboratories.
The paper was endorsed by nine professional societies: the American College of Cardiology, Alliance of Cardiovascular Professionals, American Society of Echocardiography, Heart Rhythm Society, Society for Cardiovascular Angiography & Interventions, Society of Interventional Radiology, Society of NeuroInterventional Surgery, Society of Vascular and Interventional Neurology, and Society for Vascular Surgery.
Its premise is important.
Occupational safety in the fluoroscopy suite cannot be viewed only through radiation dose.
Traditional radiation protection can itself impose a physical cost. Lead-equivalent garments reduce radiation exposure but may contribute to the musculoskeletal burden experienced by clinicians who wear them repeatedly for prolonged procedures.
ALARA+ therefore reframes the question.
As Low And as Light As Reasonably Achievable.
Regulation provides a baseline.
Good radiation protection asks another question: could the exposure have reasonably been lower?
A department can remain within an occupational dose limit while still having opportunities to improve staff position, shielding, equipment geometry, exposure settings or working practices.
The same applies to education.
The ALARA+ paper is not a paper about virtual reality training. It focuses primarily on occupational risk, enhanced radiation protection technology, imaging systems, implementation and creating safer fluoroscopic workplaces.
Training is only one part of that wider system.
No educational programme can compensate for inadequate shielding, poor room design, inappropriate equipment, weak occupational policy or an unsafe working culture.
But there is an obvious educational consequence to the ALARA+ argument.
If occupational safety is moving beyond simple compliance, radiation safety training needs to do the same.
One of the difficulties with radiation protection education is that learners cannot see scatter radiation.
Moving closer to the patient does not feel different. Changing the C-arm angle gives no sensory warning that the radiation environment around the table has changed. A poorly positioned ceiling-suspended shield does not announce that it is providing less protection than it could.
This makes radiation safety unusually dependent on conceptual understanding, procedural habits and feedback.
Simulation offers one way of making those relationships easier to explore.
As discussed in our guide to VR Radiation Safety Training: Reduce Clinical Dose Risk , a simulated environment allows learners to make a decision, observe its simulated consequence and repeat the scenario without generating clinical radiation exposure.
This does not replace clinical supervision, personal dosimetry, local radiation protection policies or equipment-specific training.
It gives people somewhere to practise the decisions those systems expect them to make.
This distinction matters particularly when organisations assess training by attendance.
A certificate can show that somebody completed a course.
It cannot show where that person stands when the C-arm moves, whether shielding is positioned effectively, or whether they recognise a higher-exposure configuration.
This is why we have previously argued for a more competency-focused approach to radiation safety training in hospitals .
The 2026 ALARA+ paper explicitly considers the effect occupational hazards can have on individual careers and health systems.
If radiation concerns, heavy protective equipment, musculoskeletal injury or unsuitable working conditions influence who enters interventional specialties, how much procedural work people undertake or how long they remain in the field, radiation protection becomes a workforce issue as well as a safety issue.
A safer fluoroscopy service needs appropriate engineering controls, modern equipment, effective shielding, personal protection, monitoring, occupational health support, good working practices and practical education.
Training sits within that system. It does not replace it.
At Virtual Medical Coaching, our interest is in the training component of this problem.
RadSafe VR allows healthcare professionals and students to explore radiation scatter, occupational dose, positioning and shielding in simulated interventional environments.
Learners can alter equipment geometry, exposure settings, staff position, patient factors and shielding, then observe how those decisions affect the simulated radiation environment.
That gives educators something difficult to achieve with a lecture alone: a way of connecting an abstract radiation protection principle with an action and a visible consequence.
Updating federal regulations is a complex process.
Clinical departments do not have to wait for that process before asking whether their own radiation safety education reflects modern fluoroscopy practice.
ALARA+ is useful because it widens the discussion.
It recognises that occupational safety is not simply a matter of staying below a dose limit. It is about designing fluoroscopy work so that the people delivering care can do it as safely and sustainably as reasonably achievable.
Education is one part of that.
And if the clinical environment has evolved over the past 55 years, the way we prepare people to work safely within it should evolve too.
Let learners practise positioning, shielding, equipment geometry and radiation protection decisions without creating clinical radiation exposure.
Explore RadSafe VR Book a demoOccupational Safety and Health Administration. Ionizing Radiation: Standards. OSHA notes that its general-industry ionizing radiation standard, 29 CFR 1910.1096, has not been substantially revised from its original 1971 version.
https://www.osha.gov/ionizing-radiation/standards
Salavitabar A, Vora AN, Altschul D, et al. ALARA+: Summit on Radiation and Orthopedic Risks in Fluoroscopic Laboratories. Journal of the Society for Cardiovascular Angiography & Interventions. 2026;5(4):104166.
https://doi.org/10.1016/j.jscai.2025.104166
Salavitabar A, Vora AN, Altschul D, et al. ALARA+: Summit on Radiation and Orthopedic Risks in Fluoroscopic Laboratories. Journal of Vascular and Interventional Radiology. 2026;37(6):108689.
https://doi.org/10.1016/j.jvir.2026.108689
Glazier CR, Glazier JJ. Coronary Intervention: History and Current Status. International Journal of Angiology. 2025;34(4):264-271.
https://pubmed.ncbi.nlm.nih.gov/41210676/
Occupational Radiation Safety in Interventional Fluoroscopy. What is ALARA+? The 2026 Reframing of Radiation Safety in Fluoroscopy.
https://orsif.org/guidelines/alara-plus
Virtual reality offers many benefits to educational institutions and businesses. Interacting with humans or equipment in VR can help enhance learning.
From radiation scatter to complicated births, VR offers a safe, ethical & effective learning environment for training in critical yet sensitive areas
How radiation safety training moved from textbooks to e-learning to VR, and what peer-reviewed studies show about VR training and measured staff dose.
Subscribe to our news, updates and more.